Foaming radiator cleaner Baton Rouge Louisiana

Foaming radiator cleaner Baton Rouge Louisiana

Foaming radiator cleaner Baton Rouge Louisiana

We constantly underpin our technological leadership with new product developments. This includes special high-performance finned tubes with optimized material and design, enabling clearly more efficient heat exchange. Foaming radiator cleaner Baton Rouge Louisiana. This pays off for you in two ways. The investment cost is reduced and you save in operating costs. Both benefits can be achieved while enjoying high-level product reliability even under extreme conditions. Foaming radiator cleaner Baton Rouge Louisiana.

In addition, we offer you a choice you rarely find elsewhere – the choice between aluminum fins and steel fins on the finned tube systems. Foaming radiator cleaner Baton Rouge Louisiana. Both variants have specific benefits.

Finned tube bundles with aluminum fins are considerably lighter, are insensitive to soiling and easy to clean. On the other hand, systems using galvanized steel offer a very long service life of up to 30 years, are extremely resistant to mechanical influences such as hailstorms and provide optimum corrosion protection as aluminum.

A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. Foaming radiator cleaner Baton Rouge Louisiana. This facilitates the transfer of heat, and greatly increases the speed of the temperature change. Plate heat exchangers are now common and very small brazed versions are used in the hot-water sections of millions of combination boilers. The high heat transfer efficiency for such a small physical size has increased the domestic hot water (DHW) flow rate of combination boilers. The small plate heat exchanger has made a great impact on domestic heating and hot-water. Larger commercial versions use gaskets between the plates, whereas smaller versions tend to be brazed

The concept behind a heat exchanger is the use of pipes or other containment vessels to heat or

cool one fluid by transferring heat between it and another fluid. In most cases, the exchanger consists of a coiled pipe containing one fluid that passes through a chamber containing another fluid. The walls of the pipe are usually made of metal, or another substance with a high thermal conductivity, to facilitate the interchange, whereas the outer casing of the larger chamber is made of a plastic or coated with thermal insulation, to discourage heat from escaping from the exchanger.

The plate heat exchanger (PHE) was invented by Dr Richard Seligman in 1923 and revolutionized methods of indirect heating and cooling of fluids. Dr Richard Seligman founded APV in 1910 as the Aluminium Plant & Vessel Company Limited, a specialist fabricating firm supplying welded vessels to the brewery and vegetable oil trades.

To achieve improvement in PHE’s, two important factors namely amount of heat transfer and pressure drop have to be considered such that amount of heat transfer needs to be increased and pressure drops need to be decreased. In plate heat exchangers due to the presence of corrugated plate, there is a significant resistance to flow with high friction loss. Thus to design plate heat exchangers, one should consider both factors.

For a various range of Reynolds numbers, many correlations and chevron angles for plate heat exchangers exist.

The plate geometry is one of the most important factors in heat transfer and pressure drop in plate heat exchangers, however such a feature is not accurately prescribed.

In the corrugated plate heat exchangers, because of a narrow path between the plates, there is a large pressure capacity and the flow becomes turbulent along the path.

Foaming radiator cleaner Baton Rouge Louisiana.Therefore, it requires more pumping power than the other types of heat exchangers.

Therefore, higher heat transfer and less pressure drop are targeted. The shape of plate heat exchanger is very important for industrial applications that are affected by pressure drop.

Air coolers are used in fundamentally different and sometimes extremely difficult ambient conditions. This refers to both production processes and climate-related conditions. Foaming radiator cleaner Baton Rouge Louisiana. What is needed are designs that are up to these requirements at any time, while also taking the customers’ wishes into account.

From the very beginning, our experts have designed and realized the most varied units for all branches of industry. Foaming radiator cleaner Baton Rouge Louisiana.Multi-faceted experience combined with an eye for everything that is feasible produce solutions which integrate perfectly into your industrial production.

CONFIGURATIONS

We offer numerous different air cooler versions in order to meet differing requirements of the process and the place of installation.

• Vertical configuration
• Horizontal configuration
• Roof-mounted configuration
• In-line configuration
• Regardless of the selected design, free air feeding and discharge must be ensured. Where space is at a premium, roof-mounted configurations are frequently used.

Finned tubes CW-tube / groovy fin

CW-tube

With the method of numerical flow simulation (CFD) we have e.g. investigated the effects of new turbulators on the fins. The results were validated by wind tunnel measurements. A patent was applied for the new Invention.

Product advantages:

• Lighter, higher efficiency and more silent than conventional products
• High efficiency in heat transfer and flow performance
• Up to 25 % less requirement of heat exchanger tubes
• Up to 30 % less electrical power consumption of the fans
• Reduced investment and operating costs
• Reduction of CO2- and Noise Emission

Groovy fin

Product advantages:

• New patented high-performance finned tube, pioneering technology
• Resists high loads, both thermally and mechanically
• Extremely dimensionally stable
• Hardly any maintenance is required – maximum reliability
• Optimized surface, fewer fans – clearly reduced energy consumption
• Less space required, less cabling – less installation effort
• Economically very profitable – saves labor, material and costs

The fin strip is subject to tensile stress and inserted into a pre-shaped spiral core tube groove and firmly rolled into the groove in a rolling process using high pressure. The displaced material is then pressed on the fin side.

• Fin material: aluminum
• Core tube material: all materials which can be easily machined.
• Maximum operating temperature: 400°C

Air Cooled Heat Exchangers (or) Fin fan Cooler or Air Fin Cooler is the same Air Cooling equipment. In some part of the world Air Cooled Heat Exchangers are also known as Air Fin Cooler. Simply says Air Fin cooler, Fin Fan cooler, Coil Cooler, Dry Cooling Tower are the other names of Air Cooled Heat Exchangers. Foaming radiator cleaner Baton Rouge Louisiana.It also used for Heat-rejecting from a hot process fluid to the surrounding atmosphere by using the atmospheric air as a cooling media.

The Air Fin Coolers are basically designed with multiple rows of finned tubes in a series of surface and required numbers of fans are used to move the low temperature atmospheric ambient air over the finned tube coil surface in order to cool the hotter fluid media. Foaming radiator cleaner Baton Rouge Louisiana.It is nothing but an extended type of industrial or automotive radiators. The finned tube bundles are modular construction for easy transportation. Foaming radiator cleaner Baton Rouge Louisiana.The various types of headers are Welded Bonnet Header, Plug Header, Manifold header, Plug and pipe header etc.,

The various types of Fins are ‘L’ type Wrap-On Fins, ‘G’ type Embedded Fins and Bi-metallic Extruded Fins etc.,. In some small type heat Exchanger wire/ strip type copper wounded/knurled Fins are also used. Other than finned tube bundle and headers, Axial flow fans and drives etc are used as per the Cooler requirement.

These Air Cooled Type Heat Exchangers are used in oil, gas, petrochemical, refinery, power and condensation plants. All type of fluids in process industries are cooled in Air Fin Coolers with the use of atmospheric air, as the cooling media which results in the economy in running costs.

Our Air Cooled Heat Exchangers are used for high pressure, high-temperature applications in process industries with metallurgy suitable for highly corrosive fluid media.

In our Air cooled Heat Exchanger division, we manufacture

• Process Coolers,
• Compressor Coolers,
• Radiator Coolers,
• Economizers,
• Coil Coolers,
• Auxiliary Coolers,
• Finned Tube Coolers,
• Tube Bundles,
• Fin to Air Coolers,
• Air Blast Oil Coolers

Suitable for all Process Industries, Gensets, Furnaces, Oil and Gas, Refinery, Petrochemical and Power plants etc.,

The air-cooled heat exchangers are mostly used when the plant location and the ambient conditions do not allow an easy and economic use of other cooling systems.

The most evident advantages of air-cooled heat exchangers are:

• Prevention of thermal and chemical pollution of cooling fluids (closed circuits)
• Flexibility for any plant location and plot plan arrangement (installation of other units)
• Reduction of maintenance costs
• Easy installation by bolted assembly
• Lower environmental impact than shell and tube heat exchangers thanks to the elimination of an auxiliary water supply

Enviro Tec provides complete air cooler units including tube bundle assembly, motor-fan groups, structure, access ladders and walkways. The typical arrangement can be:

• Forced draft
• Induced draft
• Air-recirculation unit
• Enviro Tec supplies also Pre-assembled modules.

Typical components include headers, finned tubes, and fan assembly. Foaming radiator cleaner Baton Rouge Louisiana.

Forced draft

Allows easier maintenance of the fans. Fans deliver air at ambient temperature with consequent higher efficiency. Foaming radiator cleaner Baton Rouge Louisiana.

Induced draft

The plenum chambers are mounted on top of the bundle and protect the finned surface against wind, rain, snow and partially hail. The location of the fans also ensures an optimum air distribution, limits air recirculation and allows maintenance at a lower level. Foaming radiator cleaner Baton Rouge Louisiana.

Recirculated / winterization

This feature is recommended for the special process (hydrate prevention..) and cold climates where it is advisable to provide warm air recirculation to prevent freezing or pouring. The recirculation may be achieved by means of louvers, steam coils and variable fans.

Pre-assembled modules

The long construction time needed for the installation of the plants as well as the lack of manpower and its increased cost, have prompted the introduction of the market of pre-assembled units. These units are expressly designed for safe transport and easy installation on the plant. On demand they can be shop tested before delivery. Foaming radiator cleaner Baton Rouge Louisiana.

Our Air-cooled Heat Exchangers are the preferred solutions for applications which require a great deal of customization. Foaming radiator cleaner Baton Rouge Louisiana. Enviro Tec has forced and induced draught systems with design pressures up to 160 bars, comprehensive process control options and various kinds of finned tubes. We have a team of experienced engineers that assist you throughout the design stage, to ensure that all possible challenges are taken into account and their solutions found in the design stage itself.

High thermal performance, no matter what your needs:

Enviro Tec can provide Heat exchangers with virtually any capacity, metallic alloy or pressure range. Irrespective of location, atmospheric conditions, you can rely on Enviro Tec to give you a solution that works well, because that is what we have been doing for the last 60 years.

The unique requirements of your location and application are taken into account by our engineers, who use computer modeled simulations to analyze the project in terms of projects, climate, stress and other factors affecting tower performance. Enviro Tec also customs designs and fabricates the structural and mechanical components for your unique needs, never compromising on quality in the process. To achieve uniform air distribution, Enviro Tec manufactures all mechanical components in-house specifically for use in cooling towers.

The multi-blade fans are statically balanced to enhance energy efficiency and have Automatic Variable Pitch for high performance and durability. Enviro Tec’s renowned gear reducers, available in multiple options, are designed to deliver high performance under demanding industrial conditions.

Don’t forget about our other services in industrial cleaning, With our company’s roots in industrial cleaning, Enviro Tec has excelled as an industry leader. Our water blasting services, including high-pressure cleaning, ultra-high pressure cleaning/cutting, high-volume vacuuming of wet and dry materials and numerous other services help your company’s building looking sharp and your equipment working efficiently. Our personnel minimizes outage downtime by performing industrial cleaning services that are both proficient and cost effective.

Enviro Tec operates a 24/7 emergency response crew that is available to meet your urgent cleaning needs.

An ethical and responsible industrial cleaning company we’re an industrial cleaning company

that believes in investing in our staff. Our industrial cleaners are specially trained to work at high levels on cherry pickers, scissor lifts and scaffolding towers and carry the necessary IPAF qualification. Enviro Tec solutions Baton Rouge Louisiana. Training also includes the safe use of industrial cleaning equipment such as scrubber driers, rotary buffers, Enviro Tec cleaners and pressrewashes.

Absolute H&S compliance

The health and safety of our staff and customers are of paramount importance. For all contracts we create site-specific Risk Assessments and Method Statements. COSHH Data sheets are also provided, as well as copies of our Health & Safety Policy. Foaming radiator cleaner Baton Rouge Louisiana.We are an industrial cleaning company that uses local industrial cleaners.

As a result we ensure that our carbon footprint is minimized in comparison to our competitors.As our industrial cleaners are spread across the UK they do not have to travel long miles to each job. Complete range of industrial cleaning services.

Industrial cleaners specializing in:

De-greasing hard floors

• cleaning and de-greasing
• High level cleans
• Cable trays
• Lighting
• Equipment cleaning
• Staff areas
• Public areas
• Rubbish disposal
• Windowcleaning

OUR CLEANING COMPANY CAN HELP

Commercial Cleaning Solutions Provider. At ENVIRO TEC Solutions we provide the industrial cleaning solutions and facility maintenance services you need to increase efficiency, enhance productivity, and improve profitability. Our industry support services make it easy to focus on running the business and generating revenue rather than dealing with maintenance issues.

ENVIRO-TEC Solutions focuses on identifying your individual needs, and we can tailor our services to meet your requirements. Foaming radiator cleaner Baton Rouge Louisiana.Our cleaning company has nearly 30 years of experience, and our highly skilled workforce can implement state-of-the-art equipment and technology to provide the results you expect. We will consult with you every step of the way to ensure that your needs are met and that you receive high-quality, cost-effective services that will free up your skilled resources to focus on developing and growing your business.

ENVIRO TEC INDUSTRIAL CLEANING SERVICES

At ENVIRO TEC Solutions we can tailor our services to match the needs of your industry, and our cleaning specialists can deliver the effective solutions you need to enhance your productivity and maintain compliance with industry standards. Whether you need Clean room cleaning services, or a HACCP Plan that integrates with other facility maintenance and food sanitation programs, we can help.

Our cleaning company provides solutions for companies in many different industries, including: Aerospace and Defense, Automotive Manufacturing, Medical Industry, Food Processing, and more. At ENVIRO TEC Solutions we will use our proven 3 Step Approach to facility cleaning to ensure that your needs met.

ENVIRO TEC PEACE OF MIND SOLUTIONS

At ENVIRO TEC Solutions we’ve built our business on six guiding principles, and our adherence to these goals on every job allows us to deliver the results you expect.

These principles are:

• ENVIRO TEC Solutions ISO Certified
• SAFETY EXPERTISE
• COST IMPROVEMENTS
• QUALITY FOCUS
• SOLUTIONS FLEXIBILITY
• IMPROVED MORALE AND ATTITUDE
• ENVIRONMENTAL AND REGULATORY COMPLIANCE

When you work with ENVIRO TEC Solutions you can rely on us to monitor each step of the industrial cleaning process to ensure efficiency, delivery, and the facility maintenance you expect.

From waste collection to removal, from servicing to compliance with regulations: whatever your industrial sector may be, we offer our customers maintenance solutions for equipment and infrastructures to ensure their industrial sites operate correctly.

Call Now:+1-856-678-4004

[email protected]

(Texas City, Texas) (Baton Rouge, Louisiana)

Nueva Orleans• Baton Rouge• Shreveport• Lafayette• Lake Charles• Kenner• Bossier City• Monroe• Alexandria• Houma• Nueva Iberia• Slidell• Ruston• Sulphur• Hammond• Natchitoches• Gretna• Chalmette• Opelousas•  Zachary• Thibodaux• Pineville• Baker• Crowley• Minden• West Monroe• Morgan City• Abbeville• Bogalusa• Mandeville• Bastrop• DeRidder• Eunice• Jennings• Denham Springs• Gonzales• Harahan • Houston• San Antonio• Dallas• Austin• Fort Worth• El Paso• Arlington• Corpus Christi• Plano• Laredo• Lubbock• Garland• Irving• Amarillo• Grand Prairie• Brownsville• Pasadena• Mesquite• McKinney• McAllen• Killeen• Waco• Carrollton• Beaumont• Abilene• Frisco• Denton• Midland• Wichita Falls• Odessa• Round Rock• Richardson• Tyler• Lewisville• College Station• San Angelo• Pearland• Texas City Texas